Incarceration Within The Federal Bureau Of Prisons

Over the past forty years the increased of mass incarceration within the Federal Bureau of Prisons has increased more than 700 percent since the 1970’s, between the different type of ethnicity. Billions of dollars have spent to house offenders and to maintain their everyday life from rehabilitation programs, academic education, vocational training, substance abuse programs and medical care. The cost of incarceration climbs according to the level of security based on violent and non-violent crimes. Fewer staff is required in minimum and medium-security prisons that house low-level offenders. Incarceration is likely to serves as one indicator of other co-occurring risks and vulnerabilities that makes families particularly fragile. Mass incarceration is likely to increase if awareness is not implicated to reduce the rate of imprisonment and broken families to take back their communities and reclaim their hope for the future. Thesis Statement There are many offenders within the criminal justice system, the political economy of the prison crisis in America has increased over the years which creates a questions on the way dollars sense works. With a nation of fewer crimes, prison population will diminish, but does that deter our political system to have taxpayers contribute less to the way prison systems are tracked? Introduction There are many offenders within the criminal justice system, the political economy of the prison crisis in America hasShow MoreRelatedPositive And Negative Impacts Of The Correctional System1514 Words   |  7 Pagessignificant impact on the United States. From policy, incarceration, sexual victimization, and those who oversee correctional facilities it all takes a toll on the country. Simply stated, it is the butterfly effect seen in action. When one decision, action, or lack thereof is implemented there will either be positive or negative consequences. Statistics encompassing sexual victimization, incarceration rates in the United States, segregation in prison all create an environment that offenders have to liveRead MoreThe Data Around Incarceration Rates And It s Correlations With Poverty Rates1191 Words   |  5 Pagesthis paper is to look into the data around incarceration rates and it’s correlations with poverty rates in two separate locations in the United States of America (USA). The key points within this paper include incarceration, poverty, and medium income. This paper will look at these different key points and investigate these inequalities by location. Empirical Question: Do areas with higher poverty rates in the United States face disproportionate incarceration rates compared to areas with lower povertyRead MoreAmeric Land Of The Incarcerated1296 Words   |  6 Pagestransformed the once â€Å"land of the free† into a country of mass incarceration which emphasizes on punishing offenders rather than rehabilitating them into productive citizens. To the typical American, radical governments such as Russia or China come to mind when one thinks about countries that have strict criminal codes that punish offenders with extreme prison sentences. Shockingly, the United States has the world’s highest incarceration rate of 716 prisoners per 100,000 citizens compared to the averageRead MoreIncarceration Of Americ The United States1487 Words   |  6 PagesIncarceration in America The United States has the largest prison population in the world. The U.S.’s path to our over population has been decades in the making. â€Å"The United States makes up about 4 percent of the world’s population, and it accounts for 22 percent of the world’s prison population.† (Lopez). Prison over population is a growing concern within our society creating and contributing factors include longer sentences, rising costs, prison gangs, rapes, racism and mental health issues.Read MoreThe Prison System Of America1052 Words   |  5 PagesThe â€Å"Prison Industrial Complex† was a term that was used by anti-prison activist within the prison abolishment movement to argue the attendant interest of prison industrialization, and t development of a minority prison labor force (Davis, 2003). This giant prison enterprise is an essential component of the U.S. economy, and has as its purposes such as profit, social control, and an interweaving of private busine ss and government. These giant financial institutions recognized that prison buildingRead MoreThe Problem Of Prison Facilities Essay1362 Words   |  6 PagesIt is a well know issue in America that our prisons are overcrowding. In 2010 it was estimated that our country s prison facilities were 25% over capacity. This included 19 states with prisons that were found overpopulated. The dilemma has numerous negative impacts. Some results in overpopulating consists of unhealthy living situations that do not meet the basic living needs of inmates, an increase in recidivism rates and an increase in taxes. At Touro University, Michael Ruderman, a doctoral studentRead MoreMandatory Sentencing For Non Violent Crime1050 Words   |  5 PagesAs far as alternatives go, there are several things that need to be addressed to improve and fix this overcrowded problem. There is no one reason for the overcrowding within the prison system and one has factored in all reasons that can lead up to the cau se of overcrowding in order to find a solution to this tremendous issue. Mandatory Sentencing To begin, mandatory sentencing for non-violent and drug- related crimes should be eliminated. This law was established to dispose of the drugs mastersRead MoreFederal Bureau of Prisons1287 Words   |  6 Pagesâ€Å"Federal Bureau of Prisons† The Federal Bureau of Prisons was established in 1930. Its main goal is to provide humane care for Federal inmates. There are 11 Federal prisons in operation. The Bureau consists of 115 institutions, 6 regional offices, a Central Office (headquarters), 2 staff training centers, and 22 community corrections offices. The Bureau of Prisons career opportunities web page is the place where you can learn about BOP careers, the employment process andRead MoreAnalysis Of The Documentary 13th, By Ava Duvernay1137 Words   |  5 Pagescorresponding with the mass incarceration of African-Americans in modern prison. The title represents the 13th amendment of the United States Constitution stating the abolishment of slavery. The target audience of this movie is the federal system, black communities, and the modern society. This movie seems to coincide with the Black Lives Matter movement that stormed the country in 2015 after the death of black males at the hands of police officers. Mass incarce ration across the United States makesRead MoreIncarceration Is A Method Used By The United States Criminal Justice System1364 Words   |  6 PagesIncarceration is a method used by the United States criminal justice system as a repercussion for certain unlawful actions. Criminal punishment varies upon circumstance of crime. The United States consists of approximately 125 federal prisons with approx. 200,000 inmates. According to statistics, women represent 6.7% of inmates in federal prison. When thinking of women in prison, one s first thought may be, â€Å"What about the children?† In the United States, the numbers of incarcerated women are

Benefits Of Using Hybrid Golf Clubs - 1239 Words

Golf clubs started as handcrafted clubs made of wood. They were simple, rudimentary designs. Once golf became popular and the technology advanced golf clubs were taken from a simple piece of wood to a highly engineered piece of equipment. Eventually their would be a set of standard set of clubs to have in a bag including a fairway wood, driver, irons, wedges, and putters. As with the rise of each of these clubs, a new club is designed to fill the gaps. Hybrid golf clubs originated out of a necessity for a club that could combine the forgiving nature of a fairway wood and the accuracy of an iron. First referenced as utility clubs, hybrids are a relatively new addition to a golfers bag. The design was crafted so a golfer could hit the ball†¦show more content†¦Charles T. Myers golf course in Harrisburg, North Carolina is an 18 hole public golf course. The golf course is named after a former County Commissioner of Mecklenburg County. A unique design of the Charles T. Myers is that the golf course is built upon an old Mecklenburg County landfill. The course is managed by Ratcliffe Golf Services on behalf of Mecklenburg County Park and Recreation Department. The course has had some improvements over the years because of conditions related to being built on a landfill. There are numerous venting construction incorporated on the golf course to control the buildup of explosive gases. Also, a few fairways in the past have sunk in and required some new grading. Ratcliffe Golf Services has improved the course since taking over the management and operations of the course. The County did a good job in turning a once wasted area of land into something that people can enjoy now if you like to play golf. Ratcliffe Golf Services manages every aspect of the course from clubhouse to course improvements. Ratcliffe Golf Services even added an Impact Performance Golf Learning Center where players can come and practice on the range as well as get instruction on learning the game of golf. There is a fee to join the Learning Center and you get quite a bit of extras as part of the price. You can view the price of Learning Center by clicking here. Players playing Charles T. Myers have the option of riding or walking. ThereShow MoreRelatedCallaway Golf Essay1605 Words   |  7 Pagesclubhead without adding weight, the late founder of Callaway Golf Company turned the most-feared club into the most-loved almost overnight. The driver became the fastest-selling club at retail. Many innovations have followed. From woods, irons, and putters to golf balls and golf accessories, Callaway Golf has consistently used ingenuity, quality construction, and technology to make the finest premium products in the industry. Callaway Golf has also become a global company, doing business in 107 countriesRead MoreCase Study on Golf Equipment Industry Essay3143 Words   |  13 Pagesindustry overview The retail sales of golf equipment industry, which includes golf clubs, bags, balls, gloves and footwear, declined from approximately $4 billion to about $3 billion in 2003 and then rebounded to around $3.8 billion in 2007 with many threats remaining. The changes in the retail value of golf equipment industry are closely related to the total number of golf players and total rounds of golf played in the country. The participation rate of golf has dropped approximately 21% from 27Read MoreCallaway Golf Canada Essay1873 Words   |  8 Pages| Callaway Golf Canada: The Mobile Performance Team | Case Study | | | | Jamie Merrimen 100117777 October 12, 2012 Business 1703 D1 Dr. Conor Vibert | Problem Statement Wayne Mallette is the director of performance management for Callaway Golf Canada, the world`s largest golf club manufacturer. In 2004, Mallette launched the Mobile Performance Team (MPT), a team of 20 consultants who demonstrate the Callaway equipment line as well as measuring customers for custom equipmentRead More Internet Technologies and Business Essay1261 Words   |  6 Pages Research Project The application of Internet technologies has been a growing trend in the business world for nearly a decade. More and more companies are realizing the benefits of using the web. Web use has morphed from information exchange only to enhancements for collaboration, customer service and customization. These applications now lead to increasing profits; cutting costs, minimizing production, and customer satisfaction in all areas of the manufacturing process. Companies such as MattelRead MoreDr. Pepper Snapple Group Case Study1520 Words   |  7 Pageslate 2007 the energy beverage category was reaching market maturity and projected to have a slower annual growth rate from 2007 to 2011 (10.5%) than it had between 2001 and 2006 (42.5%). Rising prices, packaging competition, and the introduction of hybrid energy beverages also added to the slower projected growth rate. However in 2007 the market still saw growth of 32%. The category is dominated by 5 major brands (94% of dollar sales), with Red Bull far above the pack with a 43% dollar sales marketRead MoreBaderman Island Technology Analysis Paper1786 Words   |  8 PagesBaderman Island Resort is a self-contained, all-inclusive resort and spa. Set exclusively in Baderman Island, the resort offers an array of restaurants, three hotels, a golf course, pristine white sand beaches, botanical gardens, and a state of the art convention center. With future expansions to include 18 additional holes to its golf course, an additional 150 acre buffer to its botanical gardens, an additional 25 acres to accommodate additional facilities for its spa, an additional 50 acres to itsRead MoreMarketing Case Study: Study of Bmw - Mini in Reference with the Malaysia Automotive Market4338 Words   |  18 PagesCASE STUDY: STUDY OF BMW - MINI IN REFERENCE WITH THE MALAYSIA AUTOMOTIVE MARKET TREND Sarah Zakariah Student ID : 0011vmvm0312 This assignment is an overview of the MINI brand and how it is relevant to the current Malaysia Automotive Market by using the Marketing Model / Tool ; Ansof Matrix and Marketing Mix of seven Ps (7Ps). TABLE OF CONTENT PAGE NO. 1. EXECUTIVE SUMMARY 2. MINI PRODUCT DNA 3. MINI MARKET POSITION AND SEGMENTATION 4. MINI : ANALYSING THE MALAYSIA AUTOMOTIVE MARKETRead MoreEnvironmental Impacts of Tourism6014 Words   |  25 Pagesinvolves many activities that can have adverse environmental effects. Many of these impacts are linked with the construction of general infrastructure such as roads and airports, and of tourism facilities, including resorts, hotels, restaurants, shops, golf courses and marinas. The negative impacts of tourism development can gradually destroy the environmental resources on which it depends.On the other hand, tourism has the potential to create beneficial effects on the environment by contributing to environmentalRead MoreDarden Mba Resumes16768 Words   |  68 Pagesscholarship); ï‚ · GMAT: 730; AWA: 5.5 ï‚ · Member of Finance Club, Energy Club and Darden Capital Management Club Charlottesville, VA Nanyang Technological University Singapore Bachelor of Engineering (Computer Engineering) and Minor in Business, June 2006 ï‚ · Awarded full scholarship (among top 50 from over 10,000 candidates) ï‚ · Received First Class Honors (top degree distinction, GPA: 3.95). Dean s list holder (among top 5%) ï‚ · President of NTU Apex Club (premier club for computer programming enthusiasts); spearheadedRead MoreChapter 8 - Business Income, Deductions, and Accounting Methods22348 Words   |  90 Pagesreasonableness is whether the expenditure is comparable to an arm s length amount – a price charged by objective (unrelated) individuals who do not receive any incidental personal benefits. Reasonableness is most likely to be an issue when a payment is made to a related individual or the taxpayer enjoys some personal benefit incidental to the expenditure. Hence, the IRS is most likely to challenge the cost of the dog food if the Jake or his family controlled the local pet food c ompany. 5. [LO 2] What

Mandatory Testing Free Essays

The Best Job It is hard to choose where you want to work when you start applying for Jobs. The first place I started working at was a hospital named Advocate Good Samaritan Hospital. After that I moved to another hospital named Alexia Brothers where I worked and remained the rest of the time till I finished high school. We will write a custom essay sample on Mandatory Testing or any similar topic only for you Order Now I started working in a hospital because my future Job is to be a surgeon. Working in a hospital gave me firsthand experience on being a surgeon. My Job at Alexia Brothers was better than my Job at Advocate Good Samaritan Hospital because of the positive atmosphere, their appearance, and the people who worked there. When I worked at Alexia Brothers the atmosphere there was so positive and refreshing. It was so welcoming and family oriented whenever you came there. The appearance of the place was always organized and professional. Even if it was a specific holiday, they would decorate the whole building with that theme. They always kept the whole building clean and up to date daily. The people that worked there with me were so helpful and welcoming. When you come In they make you feel so welcomed, it is like a big family there. Even the customers who came In were really nice and made you feel welcomed as well. Whenever I needed help everyone was there and willing to help with whatever. My boss and employees was Just like family to me. While working at Alexia Brothers I grew a close bond with my employees and joss. Working at Alexia Brothers was such a wonderful, fun filled opportunity for Mandatory Testing By Hale-Beets there with me were so helpful and welcoming. When you come in they make you feel so welcomed, it is like a big family there. Even the customers who came in were really to me. How to cite Mandatory Testing, Papers

Training Development Evaluation and Measurement

Question: Discuss about the Training Development Evaluation and Measurement. Answer: Introduction: The transportation industry is one of the most expanding and advancing industry among the different other industries of the business sector. The taxi industry is one of the most important part of the transport industry because of the services it provides Shaheen Cohen (2013). Not only the taxi industry but the whole of the transport industry has been benefitted and advanced due to the large scale of technological innovations of the modern days. However, this innovation in the taxi industry and the growth and change in demand patterns has been of benefit to some companies but has become the reason of downfall of the others (channelnewsasia.com, 2016). In the face of competition in the transportation sector, training of the new drivers and existing taxi drivers about the technology is necessary. High standard training improves the regulatory condition of taxi industry. Training increases the efficiency of the taxi drivers and services of the industry. The implementation of the new mechanism and business strategies in the taxi industry of Singapore has resulted in downfall and suffering of the general cab industry. In this particular research paper the current situation of the industry would be analysed through the Comfort Transportation and the other sharing economies such as Grab Car and Uber. As it has been mentioned by Watanabe, Naveed Neittaanmki (2016), the general taxi companies such as the Comfort Transportation and the City Cab of Singapore has been greatly affected by the launch of the sharing economies such as the Grab Car and Uber. The company Comfort Transportation has also been affected due to this and is facing a great challenge and competition because of the Grab Car Transportation. The introduction of the advanced and easy sharing economy in Singapore has resulted in the sufferings and downfall of the traditional taxi firms revenue generation. The industry has also been affected due to its adaptability issues as this industry is still working according to the traditional system and there are also low flexibility issues in this industry (Li, 2016). Training of the taxi drivers improves the skills, knowledge about the market, customer needs, attitude of the taxi drivers and social behaviour. It has been seen from the market study that the Uber cab takes lesse r time to reach and response to the customers compared to the taxis. Hence, training is required to change the skill and attitude of the taxi drivers. The taxi drivers need to learn how to meet the demand of the passengers. However, with the introduction of advances technology and advanced sharing economy, the managers of Comfort also realized the needs for reframing their business goals and objectives so that they could survive in the impacting issues. The basic change that was required in the company was being flexible and so the company decided to provide its customers with their demand and also ensure their safety and the stabilizing of the journey prices was also decided as it would also help in mitigating current problems (Henten Windekilde, 2016). To increase the revenue of the company that has gone down, the company decided to provide a 24*7 service and that too without any surge charges so that it may attract more customers than the sharing economy. However, for the development in the environmental conditions the drivers of the company require to be given adequate training on how to drive safely, behave with consumer, fulfil consumers demand and maintain the vehicle (Jonassen Grabowski, (2012). According to Zahraei et al. (2016), the developing outcomes for the Comfort Company could be assessed by analysing the different training needs of the company. The training needs of the company can be categorised in three such as occupational, organizational and individual service. The company requires acting accordingly so that it can integrate the learning outcome of these three types of training and can mitigate the deficiency in this company. There are a few factors like skills, knowledge, training, attitude and behaviour of the employees that act as the key roles in achieving the companys goal according to the occupational needs (Li, 2016). The fulfilling of the companys organizational needs is the basis of improving the success strategy and decision making process of the company. The inability of the traditional taxi services to change, adapt and flexibility has resulted in the dominance of the sharing economy. The firm therefore require getting involved in the training and skill development programs in order to maximize the competitive advantage factor as compared to the sharing economy (Phillips Phillips, 2016). The management of the company requires giving focus on the safety management for its customers and also for providing them with benefits of a large scale service industry. The individual needs of the company are related to its employees and so the company requires taking the personal requirement of its employees into consideration and providing them with job security, insurance coverage and other services. An employment structure must be maintained by the company so that it could easily survive during the increased competition level (Jonassen Grabowski, 2012). The Comfort Company requires an improved and revised organizational structure along with the trained, skilled and experienced employees so that it could emerge as dominant to the sharing economy system. The workforce performance must be highlighted by the Comfort managers in order to reach and achieve the targeted goals. Focus needs to be given on the analysis and the training of the employees for skill development and new strategies along with the workforce goals are required to be introduced (Gan, An Miao, 2014). The skill developments methods include planning about own driving, efficient driving observation, training about effective emergency breaking and skid prevention, proper use of taxi meter, security camera. Training session needs to include verbal and communication skills along with technical skills. Communication skills include ability to handle difficult customer, acting at emergency situation, dealing with customers with disabilities. These training would improve the ta xi services of Comfort and its competitiveness in the transport industry. For the procurement of the companys goal of dominating the sharing economy and generating more revenue, the company targets in implementing the technological advancements, customer oriented, analytical skill, teamwork and adaptability in the company. The other aspects such as the organizational structure, leadership skills and risk management training are also being considered (Shaheen Cohen, 2013). Apart from giving training to the drivers, the employees of the company also require special training session given so that they could understand and demonstrate their duty well. This may include the giving of educational training to the employees or some on job training. The on job training, the employees are placed in the actual situation of the job, it is learning by doing. This type of training helps in the learning quickly of the methods by watching and facing the situation themselves. The on job training may include the training sessions such as sensitivity training, transactional analysis or straight lectures. The location recognising services would also be introduced in the cab and the driver would be given training regarding on how to use and understand the maps while picking up the customers. The Comfort Company has taken up many skill training and development program to its employees and it also gives special attention on giving originality and inventiveness training of the business framework. These are goal oriented training services that have been taken up by the Comfort managers in order to operate successfully in Singapore (Watanabe, Naveed Neittaanmki, 2014). As mentioned by Henten Windekilde (2016) the mental attitude of the workforce tends to indicate their behaviors towards the growing competition. Despite cabbies welcoming rivalry, a presence of inequality forms the main source of reluctance. Unlike sharing economy, a good level of internal and external communication is beneficial to the drivers. Additionally, perpetual skills, mental models, attention, collaboration and multi dimensional behavior also contribute effectively. Around a $64 thousand funding scheme is required for the Comfort Company in order to implement a effectively structured and continuous training session for its employ. For the purpose of dominating the sharing economy and the company requires implementing of different training and skill development programs for teaching the employees and the drivers the driving skill, behavior, maintaining the vehicle, ensure safety and others. These training sessions would require adequate amount of money for training the employees (Gan, An Miao, 2014) The further investment would have to be done in order to install the road mapping device in all the cabs so that the drivers could get the benefit of location recognizing services. The employees are also required to be given training on how to use, understand and operate the road map device (Phillips Phillips, 2016). Conclusion: By analysing the research study above, it can be concluded that even after the dominance and preference of the sharing economy by the general mass of Singapore, there still exist a chance of comeback for the tradition cab services of the nation with few changes and improvement in the technology system of the company. With the help of the effective organizational structure, proper planning and skilled training and development, the traditional cab services like the Comfort Transportation would be able to regain their original position and revenue generation in Singapore. References: Gan, J., An, B., Miao, C. (2014, May). An efficient algorithm for taxi system optimization. InProceedings of the 2014 international conference on Autonomous agents and multi-agent systems(pp. 1465-1466). International Foundation for Autonomous Agents and Multiagent Systems. Henten, A. H., Windekilde, I. M. (2016). Transaction costs and the sharing economy.info,18(1), 1-15. Jonassen, D. H., Grabowski, B. L. (2012).Handbook of individual differences, learning, and instruction. Routledge. Li, H. R. (2016). Taxi Positioning in the New Age of Internet and Industrial Development Research.Procedia Engineering,137, 811-816. channelnewsasia.com (2016) New entrants turn the taxi industry on its head.Channel NewsAsia. Retrieved 3 November 2016, from https://www. /news/singapore/new-entrants-turn-the/2214680.html Phillips, J. J., Phillips, P. P. (2016).Handbook of training evaluation and measurement methods. Routledge. Shaheen, S. A., Cohen, A. P. (2013). Carsharing and personal vehicle services: worldwide market developments and emerging trends.International Journal of Sustainable Transportation,7(1), 5-34. Watanabe, C., Naveed, K., Neittaanmki, P. (2016). Co-evolution of three mega-trends nurtures un-captured GDPUbers ride-sharing revolution.Technology in Society,46, 164-185. Zahraei, S. M., Choo, C., Cheema, W., Cheah, L. (2016). Foresight Study on Singapore Urban Mobility: Methodologies and Preliminary Insights. InComplex Systems Design Management Asia(pp. 135-145). Springer International Publishing.

Applying Theories of myth Essays - Cosmogony, Comparative Mythology

The categories by which we distinguish the motifs operating in the world?s cosmogonic myths should not be used too rigidly. As should be apparent, a great many creation myths employ more than one motif. The Yuki and Genesis cosmogonies just discussed employ both the deus faber and ex nihilo motifs. The Nordic creation myths featuring the evil giant Ymir tend to combine accretion/conjunction, secretion, and sacrifice motifs?the latter evident, for example, in the Edda in which Odin and his brothers kill Ymir and make theworld from his body. Thus the nine categories just discussed shouldn?t be seen as a way of pigeonholing a myththis is an accretion/ conjunction myth; this is a sacrifice myth.? Rather, these categories should lead to speculation about why certain cultures depict the creation through certain motifs. What does it signify, for example, that, in the Tibetan story, the cosmos emerges through an incredibly gradual process thatwas not guided by an all-powerful creator? Developing a sufficient answer to this question would require some research on your part; but to demonstrate the kind of reward that asking questions about significance can bring, we could point out that Buddhism is a nontheistic religion.

In Classroom Learning is better than Learning Alone

In Classroom Learning is better than Learning Alone Introduction Learning is arguably the most important activities that human beings engage in. It is through learning that we are able to acquire new knowledge and skills. It can therefore be said that learning is integral for the development of the society. Due to the importance of learning, many societies have come up with formal institutes where learning takes place.Advertising We will write a custom essay sample on In Classroom Learning is better than Learning Alone specifically for you for only $16.05 $11/page Learn More These institutes include schools where students attend and gain information on a wide variety of subjects. However, learning can also take place when an individual looks for new material and engages in learning alone. There is disagreement over whether learning alone or learning in a classroom is most beneficial. This paper will argue that learning in a classroom is superior to learning alone and it should therefore be the primary mode of learning employed by our society. A Case for Classroom Learning Students are able to benefit from each other when they learn in a classroom setting. Paduraru notes that in the traditional classroom environment, students are able to interact with the teacher and their classmates (par. 2). This interaction makes it possible for the student to benefit from cooperative activities such as group work and class discussions. Students can learn from each other and benefit from discussing difficult concepts with each other. In addition to this, students are more motivated to learn when other individuals who are also engage in the same learning surround them. Paduraru declares that the learning atmosphere created in the classroom setting leads to higher levels of focus and motivation for the student (par. 3). All students are able to demonstrate better learning outcomes because of the inter-student interaction promoted by classroom learning. Contact with the teacher in classroom learning lead s to better learning outcomes for the student. Teachers are a very important part of the learning process since they act as informative guides. With their skills, they are able to direct the student in their learning efforts. The face-to-face interaction between student and teacher increases the grasp of the student. Paduraru declares, Some students need constant reassurance that what the do is correct and that they are going in the right direction (par. 2). The teacher is able to offer this reassurance and provide the feedback that the student needs to have confidence in his learning. Interaction with the teacher also increases the concentration level of the individual. Students are likely to pay more attention to learning when they are instructed through face to face interaction. When this happens, their learning experienced is not only better but also faster than in alone learning. Classroom learning leads to greater commitment to the learning efforts. A person is therefore able to gain in-depth knowledge on the subjects being studied.Advertising Looking for essay on education? Let's see if we can help you! Get your first paper with 15% OFF Learn More Learning requires a significant amount of time to be dedicated to the activity. Classroom learning is well structured and the teacher has a program of what the students should learn. Paduraru elaborates that traditional classrooms provide students with a â€Å"fixed schedule and specific periods dedicated exclusively to learning† (par. 5). In alone learning, a person engages in learning in an erratic manner. In most cases, only a small amount of time is dedicated to learning leading to poor results. The structured nature of classroom learning also ensures that no relevant subject matter is neglected. The student is required to read on different topics at specific times. The student is therefore forced to read on all the scheduled topics even if he/she is not fond of them. This ha s the merit of enabling the student to gain knowledge even in subjects that do not interest him/her. The classroom environment increases the interest of students in the learning activity. Interest is very important in the continued participation of a person in any task. When learning, a person is likely to become disinterested in this activity. When this happens, he/she will not gain the benefits attributed to learning. When learning alone, it is hard for most students to remain interested in the activity. In classroom learning, the teacher can use various strategies to increase interest. Weimer suggests, a good question can pique their interest, make them wonder why, get them to think, and motivate them to make connections with the content (par. 3). The individual is also prompted to commit to memory what has been learned. This is achieved when the teacher takes steps to promote recalling. Weimer suggests that the classroom setting promotes preparation in the student especially if the teacher quizzes the students on previous lessons (par. 6). When this occurs, students are prompted to come to class well versed with the information of the previous classroom session. Arguments in Support of Learning Alone A great advantage of learning alone is that it allows a person who does not have access to formal education institutes such as a school to learn. A person must be able to attend a school in order to learn in a classroom. While most people are able to access these facilities, some might lack the means to do so. This leads to many people being prevented from learning and benefiting from attaining an education. Malcolm X shows that with personal learning, a person is able to open up a new world and attain the benefits of learning (2). This is true since access to learning facilities is not assured for everyone. However, a person engaging in alone learning is unable to achieve high levels of education. The lack of structure in alone learning makes it impossible f or the individual to gain great expertise in a particular topic.Advertising We will write a custom essay sample on In Classroom Learning is better than Learning Alone specifically for you for only $16.05 $11/page Learn More Alone learning makes it possible for a person to overcome any social restrictions to his learning. In some cases, society might prevent certain people from learning. This was the case for Sherman who states that we were Indian children who were expected to be stupid† (13). In such an environment, the classroom learning is downgraded and a person cannot attain any meaningful education. Through alone learning, the individual is able to attain a higher level of learning by reading books with relevant information. It is true that in a discriminatory society, a section of the population might be denied of their right to learn. When such a thing occurs, alone learning might provide greater knowledge that classroom learning. However, eve n in such a situation, classroom learning is necessary for the individual to gain perspective of his learning progress. The individual is able to tell of his progress by comparing his abilities with that of the other students. Sherman reveals that he was able to read Grapes of Wrath in kindergarten when other children are struggling through Dick and Jane' (13). Without the classroom learning, he would not have been motivated to keep reading and achieve success in his life. A person is able to acquire more expansive and unbiased information through personal learning. As it is, there is a vast amount of information that a person can learn independently. In the classroom setting, the students learning is confined to the topics that the teacher chooses. In most cases, information is interpreted in the way that the school administration wants. There is therefore a lot of bias when presenting some information. This is not the case when learning alone since a person can read from various s ources. Malcolm X reveals his horror when he learnt about the brutality of slavery through his own reading (4). He had not been able to receive information about the horrors of slavery in his classroom learning years. It is true that classroom learning is prone to bias by the teacher or the school administration. However, learning alone is also prone to individual bias. An individual is likely to read more on the topics that interest him and favor authors who express beliefs similar to his own. Malcolm X admits that while reading philosophy, the Oriental philosophers were the ones I came to prefer (6). This demonstrates that bias is present in both along learning and classroom learning. Conclusion This paper set out to argue that classroom learning is better than alone learning. To reinforce this claim, the paper has highlighted the many advantages accrued from classroom learning. They include greater motivation and interest in learning, and acquisition of in-depth information.Adver tising Looking for essay on education? Let's see if we can help you! Get your first paper with 15% OFF Learn More The paper has also highlighted some of the advantages of alone learning and proceeded to show their weaknesses. The best learning method is one that gives the best results by enhancing the learning outcomes of the individual students. From the arguments provided in this paper, it is clear that classroom learning is the superior form of learning. It should therefore be promoted and made use of by learners all over the world. Malcolm X. Learning to read, The Autobiography of Malcolm X MALCOLM X. NY: Grove Press, 1965. Print. Paduraru, Carmen. The Advantages of Traditional Classroom Learning. Jan. 2006. Web. https://classroom.synonym.com/advantages-traditional-classroom-learning-7964781.html. Sherman, Alexie. â€Å"The Joy of Reading and Writing: Superman and Me.† Los Angeles Times 19 April 1998. Print. Weimer, Maryellen. 10 Benefits of Getting Students to Participate in Classroom Discussions. 15. Feb. 2011. Web. https://www.facultyfocus.com/articles/teaching-and-learning/10-be nefits-of-getting-students-to-participate-in-classroom-discussions/.

Art Criticism Essay Example | Topics and Well Written Essays - 1000 words

Art Criticism - Essay Example The recent cleaning of this painting is what ignited the interest of those who made the Constable exhibition possible. (3) The White Horse is an oil painting of a landscape of a cottage and its grounds, with a white horse as its focal point. The horse is harnessed and standing in the corner of a fence which is a prison him. Wanting to be free, in its stillness, the horse illustrates a contrast against the movement shown by the rest of the painting. Pulling the viewer into the scene are the paintings rounded forms, especially, in its trees and foliage. The energy depicted in the painting makes it not only have a harmonious feel but excitement as well. "Toward the end of his life, in the 1830s, Constable's art became more emotionally charged. He increasingly regarded the sky as 'the chief organ of sentiment' in landscape painting, and very likely looked to his cloud studies more for their expressiveness, than for their empirical or scientific content."(4) Constable often used paper rather than canvas to paint upon because it dried faster and allowed him to more freely express his emotions. It is the energy of his paintings that pulls me into them, while drawing forth the excitement of my emotions. Van Gogh's painting, The Olive Orchard, a 28 by 36 oil painting, is much smaller in size than the size of Constable's paintings. However, the sky in The Olive Garden has the same energy as that depicted in the skies paintings by Constable. Constable, like Van Gogh, was a lover of pastoral settings, and there is something about the combination of their subjects; animals and nature, that presents the romantic sides of their natures. It is through the pastoral theme in their paintings that I'm drawn away from the excitement of them, to a calmer side of myself. Prior to being exhibited in the Royal Academy of Art, The White Horse was part of the estate of Peter A.B. Widener. Later, it became a part of the Widener Collection on loan to the academy. (5) Other works in the Constable exhibition include The Hay Wain (1820-1821), View on the Stour near Dedham (1822), The Leaping Horse (1825), and Hadleigh Castle (1829). There are six paintings by Van Gogh in the gallery's permanent collection. Among them is The Olive Orchard, which is a 28 by 36 oil painting. Its size is much smaller than that of Constable's paintings. Yet, in many ways, their paintings are alike. The subjects in The Olive Orchard, two young women on a ladder, picking olives from an olive tree, like the subjects in Constable's pastoral scenes are similar. They act as contrasts against the energy of the skies both painters depict in their works. The Olive Orchard painting was completed in 1889, and is now a part of the gallery's permanent collection. The gallery also has in its permanent collec

Describe the regulation of PFK-1 and PFK-2 and the production of Essay

Describe the regulation of PFK-1 and PFK-2 and the production of fructose-2,6-bisphosphate - Essay Example When the glucose levels are low, F-2,6-bisP is converted to F-6-P. This reaction is catalyzed by the phosphorylated form of PFK-2 called fructose bisphosphatase-2 (FBPase-2). PFK-2 and fructose bisphosphatase-2 (FBPase-2) are similar bi-functional enzymes. Phosphorylation of PFK-2 is done by protein kinase A (PKA). PKA is activated by increased levels of cAMP driven by the hormone glucagon during fasting state. The reverse reaction is catalyzed by a phosphatase, which is activated by the hormone insulin. Postprandial, there is an increased level of insulin, which is produced in response to increased glucose levels. During low glucose levels, glucagon increases the levels of cAMP in the liver cells. cAMP then activates PKA, which phosphorylates PFK-2 to form FBPase-2. FBPase-2 in turn converts F-2,6-bisP to F-6-P, this in general is inhibiting the glycolysis (Rider 562). In muscle cells too, fructose-6-phosphate is converted to fructose-1,6-bisphosphate, by PFK-1 using ATP. In muscle cells, PFK-1 is activated by AMP. The muscles use up ATP and convert it to AMP. Increased levels of AMP stimulate glycolysis and increases ATP production. However, increased levels of ATP inhibit PFK-1allosterically. High levels of citrate also inhibit PFK-1 in muscle cells. In liver cells the major regulators of PFK-1 are F-2,6-bisP and F-6-P, while in muscle cells, the major regulators of PFK-1 are AMP and ATP. Thus, it can be seen that PFK-1 and PFK-2 are regulated differently in liver cells and muscle

Retail Store Design Essay Example | Topics and Well Written Essays - 2750 words

Retail Store Design - Essay Example stores to asses the extend of the easiness in shopping for the customers. It was proposed to evaluate the degree of illumination in the shopping space, product shelves etc and a comparison across different stores on these factors and how it influenced the shoppers choice on selection of stores. Further, a comparison across the U.S. and U.K. stores was also carried out. The purpose of such comparison is to understand the pattern of change across the countries and the customer attitude behavior in the shopping in retail stores. Another major research question that is addressed here is on predicting the customer decision to shop in one store over the other. It could be due to different set of reasons and hence the research undertaken here must be able to expose the key factors that would drive the customer decision-making. in the retail store selection. In addition, it is also planned to have an evaluation on the effect of store lighting on the decision taken to shop in a particular sho p by the customer. The retail business segment is a very vibrant and dynamic area of commercial operations that demands specialized design of its building systems. The building envelope and interior features in the retail establishments are found to have direct influence on both the mental and physical well being of the occupants as well as the clients (Hiserdot, 2002). Incorporation of technology in the business operations have helped to bring tremendous transformation on the business functions and have also led to the innovative design of the functional space of the retail business unit. The two major components that design of a retail business unit must focus are design of interiors and establishing a favorable environment for effective the visual communication (Retail Systems, n.d.) Some of the specific interventions in the retail system designs are (i) Reliable and secure systems based on efficient automated systems and (ii) Solutions that are environmentally friendly and cost effective operation s (Salvador, et al. , 2006). The retail design process is a very rigid exercise involving large number of interconnected activities like the design of the exterior, floor plan creation with selling space demarcation, interior planning, placing of fixtures and merchandise on the shelves. Unlike the traditional approaches the design process is expected involves a thorough review of the past with clear understanding of the differences with the present. It is said to create a very rich design with the help of research data. To create a changing environment in the shopping space, it is better if the designs are considered as modular and flexible. The retail segment consists of large pool of trading stores. The primary classes of the retail trade are grocery stores, drug store, convenience store, discount stores and mass merchants, department stores, specialty stores, catalogue and internet shopping. Retail Drug Stores Drug stores are among the fastest growing retail stores. This is driven partially by aging baby boomers that require more healthcare products, but also as a strategy to siphon customers away from conventional stores. Consolidation in the industry has left three national players with several thousand stores each: Walgreens Drug, CVS and Rite Aid. The study undertaken here have chosen Walgreens drug and Rite aid as the samples for

Driving Forces Of Change In Textile Industries Commerce Essay

Driving Forces Of Change In Textile Industries Commerce Essay This project is given us as final assignment in strategic management class the topic is The driving forces those forcing to change the textile industry of Pakistan the Pakistan is agriculture base country and the textile is the back bone of Pakistan economy. The purpose of doing such types of assignment is to getting the practical exposure of industries the implantation of knowledge and also familiar with the challenges and issues which currently the industries is facing. Driving forces play an importance role for the development of economy and for the growth of industries.Through this project assignment we are all familiar with the industries knowledge and experiences and get the depth knowledge of industries and the issues,challenges, problem, norms and value of the industry.During our project we also found that Textile industry of Pakistan is facing several problems due to political and economic environment. Currently interest rate of country is very high which has increased cost of production and makes it difficult for the industry to become cost competitive in the global market. A part interest rate problem, Production of the industry is very disturbed due to power shortage and law and order situation of the country. This assignment is providing the knowledge of industry and how to solve such issues challenges and problem and how to get the competitive advantage and how to compete rivalryand how to cope up with these changes and how to develop the directions of industries in particular situations and how sustainable in these changes which is due to the driving forces of industries. Chapter 02: Literature Review: Background: Research Statement: The driving forces those are forcing to change the textile industry in Pakistan Research Objective: Our research objective is following To identify the link between the driving forces and textile industries To explore the impact of driving forces on textile industries To identify the different driving forces prevailing in the Pakistan economy To find out the solutions for driving forces To find out the reason of driving forces Limitation of Research: Our research is limited in Pakistan country only and in the textile industry and the driving force whose impact on textile the research is conducted through the data analyzing. Scope of Research: The research is conduct only in Pakistan and the research cover the driving forces which is prevailing in Pakistan economy and those who impact the textile industry only. Methods of Research: The method for the research we use the data which is taken from different source and then we analyze the data through the study and through the statically tools research method is most depend upon the data that we gather from different sources and though the online collection of data and implementation. Data Gathering: The data for this topic is gathering from employee who is currently working in textile industry and from the Pakistan textile journals, different authors articles, textile mills websites, government official ministry of textile website, all Pakistan association of textile mills, Google documents, researches etc. Variables: Variable for this research is below Textile industries of Pakistan Driving forces in Pakistan Hypothesis: If driving forces is their will it impact the textile industries. If driving forces vanished what will effect on textile industries. If driving forces aretheir will effect and how much it effect the industry. Driving Forces: The driving forces are the key internal forces micro environment (such as knowledge competences workforce of management and macroenvironment as well (such as economy competition technology) that shape the future of the organization Change in industries is due to the driving forces is participants and driving forces is major cause to bring change in industries competitive condition driving forces are emerge from internal and external environment. Driving forces can include changes in social, technological, environmental, economic andpolitical factors, for example: Demographic factors (population increase, in/out migration, changing age/genderstructure, etc). Laws and regulations (affecting land ownership, labour relations, environmental protection measures, etc). Policies (subsidies, price controls or guarantees, import/export controls, quotasand tariffs, exchange rates, etc). Markets and competition (size of or access to, local, national and internationalmarkets; growing competitiveness of producers in other regions, countries etc). Technology (availability of new genotypes, machinery, etc). Institutions (new actors, influences, social organization). Information (availability, communications technology). Non-agricultural employment opportunities (processing, manufacturing, business,services, migration/ remittances, etc.) Natural resources (characteristics of watershed, water availability, groundwaterlevels, land degradation, etc). Driving Forces Analysis: Driving force can be analyzed in two steps Identify relevant driving force Assessing the impact they will have Types of Driving Forces: Some of the common driving forces of industries. Increasing globalization of industry Changes in cost and efficiency Shifting from standardized to differentiated products (or vice versa) Regulatory influences government policy changes Changing societal concerns, attitudes, lifestyles Changes in degree of uncertainty risk Changes in long-term industry growth rate Changes in who buys the product how they use it Product innovation Technological change/process innovation Marketing innovation Entry or exit of major firms Diffusion of technical knowledge Driving forces In Textile industries of Pakistan: Pakistans textile industry faces several factors, both internal and external, that affect its competitive edge in global trade. An increase in production costs because of the heavy cost of credit finance Government levies and taxation have weighed heavily on the industry, Domestic cotton has not met qualitative needs of the growing spinning and textile sectors. Pakistans downstream users have also impacted the market, Government-backed supportive policies and heavy subsidies of our regional rivals like China, Bangladesh, India and Sri Lanka. External trade and tariff barriers, such as high import duties by the U.S. and anti-dumping duties by European Union. Pakistans loss of preferential access under the Generalized System of Preferences (GSP) in the E.U. Other Driving forces in textile industry: Pakistani Mills Look For the Competitive Edge RGST to affect value-added textile sector Zero rated status for all exports to be maintained Government restores zero-rating for textiles Textile Policy 2009-14 Analysis Finance Bill to Burden Industry Further Increasing Cost of Production Electricity Crisis Tight Monetary Policy Removal of subsidy on Textile sector United States EU cuts imports of textile from Pakistan Raw material Prices Effect of Inflation Pakistani Mills Look For the Competitive Edge: Pakistans cotton and textile industries have adapted to changes in the global cotton trading environment during recent years by investing more than U.S. $6 billion in production and technology upgrades. Because of that, Pakistans domestic consumption has surpassed production by about  3 million bales. But even with increasing consumption, Pakistans textile industry faces several factors, both internal and external, that affect its competitive edge in global trade. Many mills have incurred losses during the last two years. Those mills which could not adopt the necessary changes in the new business environment because of their financial restraints and heavy liabilities have experienced the greatest losses. To make their projects viable and to minimize losses, mills are generally curtailing their production by going into fine count yarns or closing parts of their units. Current Forecast: Pakistan emerged as a major player in world cotton trade after a phenomenal increase in its spinning capacity in the last few years. Traditionally, most of the mills in Pakistan still prefer to use Pakistani cotton due to its known spinning characteristics and easy availability for making medium-count yarns. But many mills have now developed permanent plans and blends based on imported cotton to bridge the shortfall in the local cotton supply.Recently, some mills have bought about 15,000-20,000 tons of Brazilian 2008 crop on call basis for shipment in 2008, and several other mills are inquiring to buy Brazilian cotton on the same basis. Some Brazilian businesses have reported as far as 2009. Some of the mills use this mode of buying to secure their short position in Pakistani cotton. If domestic price goes up, they opt to take shipment, and if prices come down to their desired level, they mange to get their import contracts settled with the shipper with mutual consent.According to pr ivate estimates, about 2.5 million bales of different growths have been booked in 2006/07 through the end of April. By February 2007, about 1,900,521 bales (170 kgs each) had reached the country. Pakistan may need to buy another 300,000-400,000 bales, which they may cover mostly from U.S., Brazil, West Africa and Uzbekistan. Pakistans Supply And Demand 05/06 06/07 07/08 (E) Beginning Stock 4.45 3.50 3.00 Production 12.40 12.40 14.20 Imports 2.05 2.85 2.20 Total Supply 18.90 18.75 19.40 Consumption 15.00 15.50 16.00 Exports 0.40 0.25 0.40 Ending Stock 3.50 3.00 3.00 Total Distribution 18.90 18.75 19.40 (all figures in million bales of 170 kg. each) Cotton vision 2015 Under cotton vision 2015, the government plans to bring more area under cotton cultivation particularly in Balochistan and Khyber Pakhtunkhwa. According to the plan, the government wanted to increase cotton production by 20 million bales through potential areas of Balochistan and KP. Having considered various options for production enhancement, it was realized that the production level of 20 million bales could be achieved by 2015 with a modest increase in sowing areas in potential cotton growing areas of Balochistan and NWFP coupled with an average of 5% growth in per hectare yield. The sources said that cotton alone contributes nearly 65 percent of the foreign exchange earnings of Pakistan. To bring more area under cultivation and ensure food security, the government plans to purchase 100 bulldozers for land development work in Balochistan with financial assistance of Italian government. The bulldozers procured will be deployed for development of 78 thousand hectares of land (70 pe rcent new and 30 percent existing) throughout the life of the bulldozers. The bulldozers would be given to the farmers at the rate of Rs 550 per hour against operational cost of Rs 3994.60 per hour involving 86 percent subsidy. (February 16, 2011) RGST to affect value-added textile sector RGST bill was most complicated than on-going GST and urged the government not to impose RGST that was going to push the export-oriented and labor intensive Textile Value Added Textile Sector to the wall. He said that the textiles exporters had strong exceptions to the government for continuously ignoring the reservations of the exporters regarding the imposition of the RGST and Zero Rate facility would not be withdrawn. But it is fact the Govt. had not yet cleared the outstanding refund claims of billions of rupees so far. He mentioned that the government was also holding up millions of exporters money under export rebate which was at present around 1%. Now it seems impossible in the present state of functioning that FBR could smoothly release 15% of GST refunds. To meet this shortfall in working capital, textile exporter/entrepreneur would resort to bank for financing its export for which mark-up rate itself is on a parallel rise. Thus Textile Value Added Textile Sector would be lead to an ultimate collapse, which facing shortage and day-by-day growing bills of Gas, Electricity and basic raw material. RGST may lead textile industry to bankruptcy He said textile industry was consuming 15 percent (600mmcfd) of total load of 4000mmcfd but the shortage is already being shifted on the industry which is unfair. According to him, textile industry has already lost $1.5 billion exports last year as a sizeable capacity remained idle on account of non-availability of gas. This loss is likely to touch $3 billion this year due to increase in value of commodities, if the gas supply to the industry is discriminatory suspended. He feared industry production loss to the extent of 30 percent ahead in case textile industry is denied gas during peak load period starting from November till February. Textile industry has already suffered from 44 days unprecedented gas load shedding during summer. The industry worries are piling up fast with regard to the next 12 months load management policy. Government restores zero-rating for textiles The government has restored the zero-rating for textile exporters and lowered the rate of general sales tax (GST) to four to six percent on sales of textile goods in local markets from the earlier notified 17 percent. Now manufacturers will not have to pay GST on their purchases if the goods manufactured are meant to be exported. If a registered taxpayer or exporter buys yarn with an aim to sell finished products made of it (yarn) in local markets, then he will pay four percent GST. And afterwards, four percent GST will be charged at every level of value-addition instead of 17 percent. If an unregistered taxpayer buys yarn, then he will be liable to pay six percent GST, and four percent GST will be charged on every step of the value-addition chain. Moreover, authorities have also clarified that the special excise duty will only be charged from other than zero-rated sectors. And those imports that are made for the purpose of exports will also remain zero-rated. The rate of withholding tax has been fixed at one percent. All these decisions will come into force with effect from April 012011. The decisions announced in these respects on March 15 through presidential ordinances and subsequently notified through statuary regulatory orders (SROs) have become null and void. The new decisions were taken by finance minister Abdul HafeezShaikh and chairman of FBR Salman Siddique at a grand meeting with textile makers. Delegates from Federation of Pakistan Chambers of Commerce and Industry, chambers of commerce of different cities and representatives of textile bodies participated in the meeting held at Islamabad. This is a win-win situation for the government and textile makers, said a participant of the meeting. There was consensus on the rates of taxes.Officials agreed to implement four to six percent GST on local sales instead of 17 percent after they were made to realize the menace of Afghan Transit Trade (ATT). If the government had not lowered the taxes, it would have encouraged smuggling under ATT and through other channels. According to an estimate, goods worth $2.5 billion were smuggled into the country last year under the garb of Afghan transit trade. Textile Policy 2009-14 Analysis The first ever National Textile Policy was announced by the government in 2009 and is being generally hailed by the stakeholders since it not only addresses some of their key concerns and demands but also shows (albeit after a long wait) the required commitment and assumption of ownership by the Textile Ministry for providing meaningful policy direction to this largest national manufacturing sector. While the announced policy tends to be quite comprehensive and well researched its success will largely depend on the team assigned to micro manage its implementation and the operational strategy it then goes on to adopt. More often than not, perfectly good policies in the past failed to yield the desired results owing to blatant micro-management failures. Further, we find that embedded in the policy itself are measures that represent its core strength but ironically remain beyond the executionary ambit of the Textile Ministry. For example, it is all very well to announce Priority in Gas and Electricity Load Management, but to be able to effectively carry this out poses some serious practical challenges. First, to implement such a measure requires equal assurance and willingness by the related yet different ministries, namely Water Power and Oil Gas. Second, the textile industry itself is scattered and does not draw power from either dedicated textile feeders or textile specific po wer stations. Therefore ensuring continuity of supplies only to textile mills while switching off others, may operationally not be doable. Third, the textile industrial units (especially the small and medium sized) are so grossly intertwined with residential areas in virtually all industrial centers such as, Faisalabad, Gujranwala, Sialkot, Sheikhupura, Multan, etc., that it gets to be virtually impossible to separate the gas and electricity supply lines of domestic users from the industrial ones. Perhaps a better approach would have been to consult with relevant ministries and announce that a) Textile units in all sizes are entitled to alternative feeder arrangement that ensures continuity of supply from one feeder while the other is switched off for load management, b) Gas to be made available at the doorstep of textile units (like in the earlier days) to overcome the current prohibitive cost of simply getting a gas connection installed; a cost that at present literally denies a significant portion of the industry from cheap, efficient and clean fuel in shape of natural gas, c) Since gas supply management is there to stay, especially in winters, why not just announce a reduced gas tariff (like in Bangladesh) for industry that can in-turn help average out additional fuel costs undertaken by the industry during the period when gas is not available, and d) An establishment of a joint cell consisting of representatives from related ministries and the industry to create a forum that is easily accessible to mill managements and that can at the same time ensure to resolve problems that emerge on an on-going basis. Increasing Cost of Production Textile industry of Pakistan is facing problems in competing in the international market due to increase in the cost of production. The increase in the cost of production is due to the facts like interest rate, inflation and the continuous depreciation of Pakistani rupee value.Textile exporters rightfully demand reduction of Kibor rate to 8% to avoid a severe decline in exports. A three-year comprehensive textile policy is expected to be announced before budget 2009-10. The textile policy has been designed to enhance the exports of textile sector to $ 25 billion in next three years. This was stated by the Minister for Textile Industry RanaFarooqSaeed Khan. Textile Minister further informed that the spinning and weaving sector would get its due share from the Export Investment Support Fund, worth Rs. 40 billion allocated in the Federal Budget 2009-10. Electricity Crisis As a consequence of load-shedding the textile production capacity of various sub-sectors has been reduced by up to 30 per cent. The joint meeting of APTMA other related organization was held at APTMA House to formulate a joint strategy to address the alarming electricity crisis being faced by the textile industry. The meeting unanimously decided to constitute a joint working group of electricity management for the textile industry in the larger interests of the value chain of the textile industry. The joint working group will meet shortly to design a detailed plan to pursue the following goals; immediate total exemption from Electricity load shedding for the textile industry value chain; Rationalization and reduction of electricity tariff. The load-shedding of electricity cause a rapid decrease in production which also reduced the export order. The cost of production has also risen due to instant increase in electricity tariff. Due to load shedding some mill owner uses alternative s ource of energy like generator which increase their cost of production further. Due to such dramatic situation the capability of competitiveness of this industry in international market effected badly. Fig.1. illustrates comparison between electricity production and consumption (Business Recorder Pakistan -Special report, 2009). Tight Monetary Policy Due to the stiff monetary policy the cost of production is high. Due to high interest rate financing cost increases which cause a severe effect on production. The withholding tax of 1% also effects the production badly. The high cost of doing business is because of intensive increase in the rate of interest which has increased the problems of the industry. The government should take immediate measures to remove slowdown in the textile sector. Removal of subsidy on Textile sector The provisions of Finance Bill 2009-10 are not textile industry friendly at all. Provisions like reintroduction of 0.5% minimum tax on domestic sales, 1% withholding tax on import of textile and articles etc., are nothing but last strick on industrys back. Reintroduction of minimum tax on domestic sales would invite unavoidable liquidity problem, which is already reached to the alarming level. The textile industry was facing negative generation of funds due to unaffordable mark up rate. United States EU cuts imports of textile from Pakistan United States cancel more than 50% of textile orders of Pakistan .US also impose a high duties on the import of textile of Pakistan which effect the export in a bad manner. US EU are the major importer of Pakistan textile which create a huge difference in export of Pakistan textile after imposing a restriction on import of Pakistani textile goods. Raw material Prices Prices of cotton other raw material used in textile industry fluctuate rapidly in Pakistan. The rapid increase in the price raw material effects the cost of production badly. The increase in raw material prices fluctuates rapidly due to double digit inflation instable internal condition of Pakistan. Due to increase in the cost of production the demand for export home as well decreased which result in terms of downsizing of a firm. Hence the unemployment level will also increase. Government should take serious step to survive the textile industry. In order to decrease the price raw material for textile we need to increase our production capability. Simultaneously, the government should make arrangement for introducing international system of Cotton Standardization in Pakistan to enhance quality and value of Pakistan lint cotton by utilizing the technical services of Pakistan Cotton Standard Institute. Effect of Inflation Inflation rate is measured as the change in consumer price index (CPI).Inflation is basically a general rise in the price level. It is decline in the real value of money. Inflation can have adverse effect on economy. Pakistan is one of prey of inflation. It still faces high double digit inflation. The increase in inflation causes the increase in the cost of production of textile good which return in downsizing. The double digit inflation causes reduction in exports of textile. (FPCCI) Chapter 03: Industry Profile: Background: World Textile Industry was initially started in Britain at the beginning of the 18th century was the production of textilesas the spinning and weaving machines were invented in that country.Preston barber Richard Arkwright in 1769, patented a machine that would take cotton spinning from home to the factory. Arkwrights water frame was the first textile machine to use water power rather than muscle power. From this marked the factory system started, which later spread to other industries.According to statistics, the global textile market possesses a worth of more than $400 billion presently. The industry has faced high competition and opportunities in a more globalize environment. It was forecasted that Global textile production will grow by 25% between 2002 and 2010 and Asian region or the Asian countries will largely contribute in this sector.The WTO has taken so many steps for uplifting the textile industry sector. In 1995, WTO had renewed its MFA and adopted agreement on textiles a nd clothing (ATC), which states that all quotes on textile and clothing will be removed among WTO member countries.However the level of exports in textiles from developing countries is increasing even if in the presence of high tariffs and quantitative restriction by economically developed countries.Moreover the role of multifunctional textiles, eco-textiles, e-textiles and customized textiles are considered as the future of textile industry. Types of Textile Industry: These are the industry lie in the textile sector Cotton industry Woolen industry Silk industry Linen industry Pakistan Textile Industry Description: Whenever we think of manufacturing industry in Pakistan, it is textile industry that immediately comes to mind that is playing an important position in terms of the employment generation and value added special contribution towards the exports. Pakistans textile industry is one of the most important sectors of Pakistan. We can say that after agriculture sector, the textile industry is the backbone of Pakistan as it contributes significant part to the country GDP, exports as well as employment. s the fourth largest cotton producer in the world. Because of its plentiful, indigenous cotton supply, the textile industry is central to the Pakistani economy. The Pakistan textile industry has strong base of raw material, started its journey from non existence in 1947 with meager size of 78000 spindles and merely 3000 looms that was unorganized sector, and only 8% domestic demand was catered. The industry has gone through a long way and now possesses 443 units, 8.4 million spindles and 166,000 rotors, 20,000 shuttles less looms, 200,000 power looms, over 600 processing units and over 2500 garments units.Textiles and Clothing, no doubt is the largest industrial sector of Pakistan from the investment, employment and export point of view. It accounts for approximately 27 percent of total industrial output, absorbs about 38 percent of industrial labor force, and contributes around 60 to 65 percent to export earnings. [Pakistan Economics Survey]. The cotton countryà ¢Ã¢â€š ¬Ã‚ ¦.. Fourth largest producer of cotton after USA, China and India. Third largest consumer of cotton. Third largest exporter of cotton textiles. Second largest supplier of cotton yarn with 26% share of the international market. These are the main sectors of Textile Industry: Spinning Weaving Finishing Dyeing/ Printing Pressing Fashion designing Spinning It is the process of converting raw material into yarn. The raw materials may be natural materials such as cotton or manmade fibers such as polyester. Sometimes, the term spinning is also used for production of manmade filament yarn. Weaving It is the process of making cloths like t-shirts, jeans and all, rugs, blankets and other products by crossing two set of threads over and under each other. Now, weaving machines are used for this process. Weaving is the most important sub-sector of textile. The exports of woven fabrics and other related woven made-ups form a major portion of textile exports from Pakistan. Finishing Finishing of cloth is one of the chief arts in the textile industry. The appearance of the any product is the first concern, and the appearance of any fabric is just because of the methods of finishing. Dyeing/ Printing The Dyeing of clothing and other materials is a fairly simple process. It doesnt consume much time and workactually it often depends on what type of dye you purchase. Printing is something through which cloths are printed with different designing and prints. Pressing The cloths which came after the process of dyeing and printing would go for the pressing. It is simply pressing the cloths. Fashion Designing It is new in the textile industry, actually the popularity of fashion designing begin from previous couple of years. It is the applied art dedicated to clothing and lifestyle accessories created within the cultural and social influences of a specific time. Process of Textile Value Chain Challenges to textile: Frequent fashion changes. Anti dumping policies imposed by major importers. Non tariff barriers may increase such as standards relating to child labour, human rights, wages and working conditions, use of carcinogenic chemicals, inflammable materials, etc. Increased competition from India, China, Turkey, Caribbean Sub-Saharan countries and others who have preferential trade arrangements with major importing countries. High power cost frequent power cuts. Lesser usage of eco-friendly materials.   Lack of international marketing efforts. Higher rate of interest on loans for modernization and expansion.   Less awareness in acquiring international quality certifications. Chapter 04: Company Profile: Name Owner Location Adil Textile Gulistan Textile Mills Limited Quetta. Text Accord Textile Gulistan Spinning Mills Limited Quetta Textile Mils Ltd Ahmed Hassan Textile Mills Limited Gulshan Spinning Rashid Text. Ahmed Spinning Mills Limited Hafiz Textile  Ã‚   Ravi Textile Mills Al -Azhar Textile Hajra Textile Redco Textiles Al-Abid Silk Mills Hala Spinning Regent Textile Ali Asgahar Textile Hamid Textile Mills Reliance Cotton Alif Textile Harnai Woolen Mills Reliance Weaving Al-Jadeed Textile Haroon Oils Resham Textile Allawasaya Textiles Harum Textile Ruby Textile Mills Al-Qadir Textile I.C.C. Textiles Rupali Polyester Limited Amazai Textile Ibrahim Fibre Ltd. Sadoon Textile A

Magnetic Resonance Imaging Essay -- Medical Technology Medicine Essays

Magnetic Resonance Imaging Magnetic resonance imaging has the potential of totally replacing computed tomography. If history was rewritten, and CT invented after MRI, nobody would bother to pursue CT. --Philip Drew (Mattson and Simon, 1996) WHAT IT IS Magnetic Resonance Imaging, or commonly known as MRI, is a technique used in medicine for producing images of tissues inside the body. It is an important diagnostic tool because it enables physicians to identify abnormal tissue without opening the body through surgery. MRI lets physicians see through bones and organs. MRI does not expose the patient to radiation, unlike tests that use X-rays. MRI provides an unparallel view inside the human body. It is the method of choice for the diagnosis of certain diseases, disorders, and injuries. MRI is safe for most people, but it uses a powerful magnet and so cannot be used on people with metal implants, such as pacemakers or artificial joints (World Book, 2000). WHAT IT IS LIKE INSIDE Three main components make up an MRI unit: a magnet, devices for transmitting and receiving radio waves, and a computer. The patient is placed inside a machine that has a huge magnet. There is a horizontal tube running through the magnet from front to back. This tube is known as the bore of the magnet. The patient, lying on his or her back, slides into the bore on a special table. Once the body part to be scanned is in the exact center or isocenter of the magnetic field, the scan can begin (www.howstuffworks.com). The magnetic field causes the nuclei of certain atoms inside the body to line up. The machine then sends out a radio signal, which causes the nuclei to change direction. The change create signals that a computer translates to produce ... ...ams are also very expensive. (www.howstuffworks.com) For most patients, the numerous benefits of MRI far outweigh the drawbacks. MRI can provide you with an abundant amount of information about your health.MRI is a tool to diagnose, visualize, amd evaluate parts of our body. MRI can help prevent the spread of diseases by catching them in their early stages, and so still treatable. Staying healthy is probably the most important thing that we can do. Medical technology, such as MRI, can help us do that. Sources: Lauterbur, Paul C., and Liang, Zhi-Pei, Principles of Magnetic Resonance Imaging, IEEE Press, New York, 2000, p. 2-4. Mattson, James, and Simon, Merrill,The Story of MRI, Bar-Ilan University Press, New York, 1996, p. 1. World Book Encyclopedia, Magnetic Resonance Imaging, World Book Inc., Chicago, Vol 13, 2000, p. 56-57. www.howstuffworks.com

Beawolf is the destruction of peace and order in a community or nation

Violence, in the world of Beowulf, not only carries with it its inherent negative effects but also it helps to bring out good human qualities. The violence being described in the epic is the murder of inhabitants and the plundering of their possessions. The first negative effect of violence as depicted in Beowulf is the destruction of peace and order in a community or nation.In the epic, the key conflict is preventing or stopping evil monsters from causing violence to the hero’s land and those of neighboring shores. The two key enemies are Grendel and the Dragon.Grendel is a â€Å"grim monster†¦a descendent of Cain† who lives in a murky pond with his mother and with â€Å"elves and evil spirits† (Beowulf Book I). Cain is referred to in the Bible as a man who murdered his own brother so that as a punishment God cursed the ground for him and that he was sent out as a wanderer in the earth (â€Å"Genesis† 3). During times of great celebration in the grea t Hall built by King Hrothgar, King of Denmark, Grendel suddenly attacked the King’s guests. The attack brought terror and grief to the Danes and as a result the peace and joy they felt vanished.It is important to note that such merciless act was committed without any provocation from the Danes at all. One day Grendel just decided to come out of his lair and slaughtered his captives. The grief and terror felt by the Danes lasted for twelve long years as Grendel continued his cruelty (Beowulf Book I,II). The Dragon, on the other hand, was a monster â€Å" with a fire belching out of its mouth† who attacked Beowulf’s kingdom in his old age(Beowulf Book XXXII). He, too, was described as ruthless, strong and hard to be subdued.In a Christian context, a Dragon symbolizes evil and death (â€Å"Dragon† 2007). But unlike Grendel, the Dragon attacked upon provocation. His anger was roused when his treasures was stolen from a burial mound. Out of revenge he attack the Geats who at this time were enjoying fifty years of peace and serenity brought about by the wise rule of King Beowulf (Beowulf Book XXXI). Another negative effect of violence as depicted in the epic is the threat it caused to the survival and maintenance of civilization or nation. Grendel slaughtered his victims and carry off some prisoners to his abode.Book II describes his assault this way â€Å"unhallowed wight, grim and greedy, he grasped betimes, wrathful, reckless, from resting-places, thirty of the thanes, and thence he rushed fain of his fell spoil, faring homeward† (Beowulf Book II). Grendel is hard to be defeated because according to the epic no weapon can destroy him. The Dragon, on the other hand, would â€Å"burn homes with fire â€Å"(Beowulf Book XXXII). Both monsters would make their assault at night, a time when the people are supposed to be resting and therefore slightly defenseless.In the cover of darkness both fearsome creatures can carry on their sl aughter swiftly. The Dragon stood unopposed as the people could not get near him due to the flames from his mouth (Beowulf Book XXXII). In such a hopeless situation and without any intervention, the inhabitants will be eventually wiped out. Violence also breeds other violence. When Beowulf killed Grendel, Grendel’s mother was consumed with fury and tried to avenge his death. It does not matter to her if Grendel was the one at fault.In her screwed reasoning, Grendel was his son and therefore needs to be avenged. Prior to his death, Grendel’s mother was not in any way physically involved with the slaughter. However, upon his death, Grendel‘s mother became as ruthless as his son. Without any further delay, Grendel’s mother went out to the Hall hoping to kill the criminal who put his son to eternal sleep. However Beowulf was not around so that angrily she took a Danish nobleman and Grendel’s paw and carried them with her back to her home( Beowulf Book X IX ) .Upon hearing of this incident, Beowulf run after her and with a sword ended her life. In another sense we can say that the death of Grendel, Grendel’s mother and the Dragon at the hands of Beowulf was also a form of violence. However, upon careful analysis, such violence can be considered necessary to end the greater violence committed by the three aggressors. In the epic, violence only ended at the death of the three. If left alive, there is a big possibility that their violence will continue owing to their untamed evil natures.Although violence is a wicked thing to commit and should be avoided at all cost, but if present it helps to bring out the heroic trait of an individual. The hero is the man of the hour who stops and controls the spread of violence. While the enemy is described as evil and ruthless, the hero is describes a s a man possessing a good, companionate and courageous heart. Beowulf was such a man. He was a prince who possessed not only these good human traits but also endowed with great strength that equals, if not surpassed, the aggressors.Even long before he came to the aid of King Hrothgar, he had already proven his fighting prowess when he killed the sea-monsters that plied the sea he swam in on his way to help the Finns in getting rid of their enemies(Beowulf Book I).. He showed his compassionate heart when hearing of Grendel’s cruelty in Hrothgar’s kingdom; he sailed to Denmark without waiting any pleas of help from the Danish king ( Beowulf Book III). Unarmed and single-handedly he engaged Grendel in mortal combat (Beowulf Book XI).Grendel was surprised at the firm grip of Beowulf and according to him he had not yet ever encountered such a strong man in his lifetime. Beowulf managed to tear Grendel’s arm out of his shoulder. â€Å"The awful monster had lived to feel pain in his body, a huge wound in his shoulder was exposed, his sinews sprang apart, and his bone-locks broke). This wound had mortally wo unded Grendel so that he later died in his lair. The Dragon, o the other hand, was challenged by Beowulf in his den. The two struggled against each other until Beowulf killed him with the sword).Unfortunately Beowulf, old at this time, was also wounded and eventually died (Beowulf Book XXII). It is important to note that as a hero Beowulf fought against evil forces from his youth until his old age. The epic delivers a strong message that preventing and controlling violence is a never-ending struggle. When Grendel’s violence ended, another one arose in the hands of the Dragon. In the face of violence, the loyalty of an individual is exposed. During Beowulf’s fight with the Dragon, the struggle became fearful to watch so that Beowulf’s men flee in fright.Only Wiglaf remained to help his aging monarch. Even at the cost of his life, Wiglaf help Beowulf slay the fiery Dragon (Beowulf Book XXXVI). His loyalty and gallantry was later rewarded when before Beowulf died h e proclaimed Wiglaf as his successor to the throne of Geatland (Beowulf Book XXXVIII). This last gesture of Beowulf is a declaration that loyalty in the face of crisis is to be honored. It is possible that without Wiglaf, Beowulf, wounded and old as he was, would have failed to put an end to the Dragon’s life. The Dragon then will continue to terrorize the Geats.Wiglaf’s loyalty was crucial in attaining the victory of that climatic battle. Beowulf was assured that with Wiglaf the struggle against violence will be carried on long after his death. To the eyes of the Geats, Wiglaf is a source of hope for the survival and maintenance of Geatland. On the other hand, those who deserted Beowulf were reproached and reaped nothing but shame. WORKS CITED â€Å"Dragon. † Microsoft ® Encarta ® 2007 [DVD]. Redmond, WA: Microsoft Corporation, 2006. â€Å"Genesis†. The Holy Bible. Korea: Thomas Nelson, Inc. , 1984.

China and WHO essays

China and WHO essays This essay was written for the Model United Nations (MUN) application at the American School of Doha, Qatar, by Hossein Moshfeghian in the 01-02 schoolyear. The debate over Chinas human rights violation has been an ongoing issue in the international communities for the past decade. One way to show the international communitys disapproval of the human rights violations in China that comes to mind would be to prevent it from joining international organizations, such as the World Health Organization. However, due to the nature and role of the World Health Organization, and the nature of Chinese politics, government, and social atmosphere, I strongly recommend Chinas acceptance to the World Health Organization, despite the countrys supposed human rights violations. The following support my argument. First, the situation of human rights in China needs to be examined. According to the US Department of State, The People's Republic of China (PRC) is an authoritarian state in which the Chinese Communist Party (CCP) is the paramount source of power. At the national and regional levels, party members hold almost all top government, police, and military positions. Ultimate authority rests with members of the Politburo. Leaders stress the need to maintain stability and social order and are committed to perpetuating the rule of the CCP and its hierarchy. Citizens lack the freedom to express peacefully opposition to the party-led political system and the right to change their national leaders or form of government. This view is shared by most western nations and many other countries throughout the world. Even assuming this view to be completely factual and accurate still does not justify a refusal to admit China into the World Health Organization. The World Health Organization is a special agency of the United Nations with a goal of improving the level of health of all people worldwide. It was established for the benefi...

The significance of power relations in communication in social work The WritePass Journal

The significance of power relations in communication in social work Introduction The significance of power relations in communication in social work IntroductionPower relations in social workParadigm shift for greater effectivenessEffective communicationHindrances to effective communicationConclusionReferencesRelated Introduction Effective communication is important in all spheres of human activity, in the interplay between human nature or individual agency and society or social structure. In this regard, the informal interactions form the basis of social work and effective communication helps coordinators relate better with subjects (Koprowska, 2008). Social work refers to multi-disciplinary endeavours that seek to improve the quality of life and wellbeing of individuals, groups or communities through interventions on behalf of those afflicted with poverty, real or perceived social injustices and violations on their human rights. Interventions could be through such mechanisms as research, direct practice, education, policy and community organizing (Trevithick, 2010). Social influence and/or control are concepts that refer to the means through which people’s feelings, thoughts, behaviour and appearance are regulated in social systems. This is achieved mainly through socialization, the effect on one’s opinions, behaviour and emotions by others through conformity, peer pressure, socialization, leadership and persuasion (Trevithick, 2010). Through this, individuals identify with the social system’s values and norms and thereby acquire stake in the maintenance of these norms and values. This ability to influence the behaviour of people is defined as power (Bar-On, 2002). Disparities in power between a social worker and the service user often result in the entrenchment of discrimination, oppression and non-involvement in practice. This paper explores the significance of power relations in communication in social work and contribution to the discrimination and oppression and ways in which this can be challenged including enhanced pa rticipation and involvement, especially through effective communication. Power relations in social work Social work is inherently political and is therefore all about power and, thus, it is essential that social workers understand the effects of power within the structures in which they work and the society overall (Bar-On, 2002). The term power is often used interchangeably with authority which is perceived as legitimate by the social structure, the patterned social arrangements present in society that both emerge from and determine the actions of individuals (Bar-On, 2002). The sociological examination of power is concerned with the discovery and description of relative strengths, whether equal or unequal, stable or subject to change. Given that it is not innate, and that it can be granted to others, power can be acquired through the possession or control of a form of power currency which include: formal authority delegated to a holder of a position (legitimate power); authority derived from particular skills or expertise (expert power); capacity for the application of negative influences such as threats and punishment (coercive power); as well as the ability to offer rewards and therefore to wield power over subjects (reward power); and the ability of the power wielder to attract others and build loyalty (referent power) (Bar-On, 2002). Lukes (1974), in developing the three-dimensional model of power, argues that power is socially and culturally located with the culturally patterned and socially structured behaviour or practices of groups or institutions significantly sustaining the bias in the system far more than the series of individual actions. Thus, there is a latent contradiction of interests between those exercising power and those affected, whose real interests are excluded. This argument challenges the views based on the idea of collective consent fronted by Arendts communications theory and the Webarian view of legitimate power which dispel the view that there is potential for powerlessness in social interactions. This has implications for social work including the view that social workers exercise power though in many instances are unaware of the wielded power, and that it is essential to examine the position of social workers as it may affect what they see as their role (Bar-On, 2002). This scenario exacerbates powerlessness with a person (service user) agreeing to an action due to the social structure of power which places authority on the social position of the professional rather than on the agreement or consensus between the two parties. This is heightened in such instances as the use of coercive power inherent in the legitimate power of the social worker conferred by statutory legislation (Askheim, 2003). Experiments in psychology suggest that the more power wielded by an individual, the less they can take the perspective of others, implying that they have less empathy. It was also noted that decreased power is related to enhanced constraint and inhibition (Bar-On, 2002). Stereotypes and prejudices inherent in social structure and culture therefore remain unchallenged resulting in possible discrimination, oppression or exclusions of sections of society or individuals requiring service (Thompson, 1993; Trevithick, 2010). The post-modernist view of power fronted by Michael Foucault (1980) gives a central role to communication and knowledge in the understanding of power within society. The guiding principle of modernity reinforces existing power structures thereby increasing the status of professionals, placing value on professional knowledge and marginalising local or subjugated knowledge.   This focus is what is referred to as professional discourse (Foucault, 1980). This exclusion is a reflection of the critical power imbalance within societal structure, and the legitimization of knowledge demonstrating the link between the exclusion for professional discourse and oppression (Pease, 2002). Users of services or clients often feel that social work endeavours are, in this regard, inappropriate or insensitive to their needs. Social workers occupy a unique position in society working for both the service user and the good of society overall. This often results in tensions between loyalties to service users and to service agencies or public authorities. Often, social workers acknowledge feeling powerless in their dealings with service providers, though their statutory powers make them believe they are overly powerful. Herein, an interesting paradox arises in the dichotomy of power in which social workers are often considered as either ineffective or extremely forceful (Pease, 2002). The dichotomous view of power is often exacerbated within social work as a result of the opposing structure between the worker and the client which forces the worker into the powerful position, controlling and directing the course of action often in a one-dimensional framework, while the client is forced into the position of powerlessness (Askheim, 2003). This is evident in the fact that despite the decade-long adoption of the anti-oppressive practice theme to guide teaching and practice of social work, recipients of such practice (clients) have not been significantly involved in discussions regarding the development of such anti-oppressive practice (Pease, 2002). Paradigm shift for greater effectiveness There is need for social workers to understand their position within the prevailing power structures, as well as to understand why they feel powerless in their work (Pease, 2002). This would enable the challenging of structures that perpetuate oppression and the development of solutions that aid the combat of negative effects of power differentials on the users of service (Askheim, 2003). Differences in power have to be taken into account and new procedures introduced so as to improve communication and, therefore, relations which can then foster the effective conduct of social work within communities. The key to taking account of the power by social workers in their work and relations with service users is empowerment. This entails the redistribution of knowledge and the uprising of other forms of knowledge which have been disregarded and subjugated as opposed to focus on professional knowledge as the only legitimate form (Pease, 2002). This would require the shift from such modernist focus towards a more critical approach to challenge the dominant discourse and to question the connection between knowledge and power enabling the enhancement of influence through social work approaches that aim to foster social transformation and change. Through this, the inclusion of service users in social processes, professional discourse and development of practice is legitimized (Askheim, 2003). This offers a more realistic approach to the challenge of prevailing power structures that tend to perpetuate and enhance discrimination or oppression of service users incorporating various dimensions including the oppressed, as well as the social workers. In order for social work to learn from its relations with service users and organizations (service providers), it is essential for their greater involvement to ensure true empowerment, balancing between gains from expertise and the empowerment of individuals involved in various aspects of social work (Askheim, 2003; Pease, 2002). Empowerment would reduce the inequalities in power relations in social work as well as challenging consequent oppression and discrimination. It would also enable the formation of meaningful professional partnerships with community organizations allowing for learning from both experiences and expertise. For significant change towards empowerment, there is need for focus and emphasis on social processes which encourage social workers to listen to the stories of service users, externalizing them and thereby enabling service users to retain greater control of the management and overcoming of the problems (Pease, 2002; Thompson, 1993). Focus is on the service user and the objective is their enablement to identify their own needs and solutions within the wider social context, rather than seeking to fit a pre-formed and set social model with its embedded ills (Askheim, 2003; Trevithick, 2010). Effective communication Emphasis on social process and the stories and experiences of service users requires the employment of effective communication to foster social work relations and essential partnerships. Communication is undoubtedly vital, an important part of human existence and is at the heart of all social work, in dealing with people and their problems (Thompson, 2011). Its skilful use by social workers can be hugely beneficial in empowering service users as it has the power to ensure the promotion of their well-being and equality. The basis of social work is informal interactions enabling better relations with service users, with the requirement for their trust and comfort essential to success of endeavour (Koprowska, 2008). This is only possible through effective communication. Effective communication skill does not just refer to verbal skills but also includes proficiency in non-verbal communication skills, especially in instances where service users may have difficulty communicating their problem verbally (Koprowska, 2008). There is need for such skill in communication which can enable the service user to build up confidence, incorporate friendship and good relations (reliability and compassion), as well as enabling them to feel that their problems are addressed in sincerity enabling them to open up in discussions which enhances overall understanding and formulation of solutions to problems (Thompson, 2011). Hindrances to effective communication With a number of complicating factors challenging communication, it is no justification to avoid making an effort to engage in social interaction. This would amount to the perpetration of discrimination and hindrance to the effectiveness of social work (Koprowska, 2008). There are various ways in which difficulties in communication tend to arise. First and most obvious is anxiety, the feeling of discomfort attendant to the lack of awareness of what is expected in a particular situation. This can lead to lower concentration and increased tension which hinders effective communication. The assumption of similarity is another hindrance and occurs often unintentionally, based on a lack of knowledge or awareness, when operations follow norms and rules of culture which are not universal and which may not be appropriate in other contexts (Thompson, 2011). Another hindrance to effective communication and similar to the assumption of similarity is ethnocentrism. This is based on distorted cultural assumptions and the belief that ones culture supersedes all others. The power dynamic in this case is significant hindering relations and interactions. Stereotyping and prejudice is also a significant hindrance to effective communication with rigidly held views and prejudgment hindering interaction and connection (Thompson, 2011). Other impediments include variations in language, misinterpretation of non-verbal communication often due to variations in cultures, as well as disabilities which among other difficulties hinder effectiveness of communication and interaction. To tackle these challenges and impediments, it is essential that root causes are identified early and dealt with before they significantly affect social interactions and outcomes of social work endeavours (Koprowska, 2008). Knowledge and skill in communication are closely interrelated with skill dependent and drawing upon knowledge, while knowledge is broadened and deepened through practice, ideally the application of skills. Building of skills ought to be premised upon the building up of knowledge (Thompson, 2011; Trevithick, 2010). Among essential skills for effective communication is the ability to tune in to various communication situations in varied contexts; as well as, sensitivity to potential difficulties and hindrances so as to enhance capacity for response and their prevention. There is also need for a balance between anxiety and complacency, being able to recognize potential difficulties but also making sure that anxiety is checked (Trevithick, 2010; Thompson, 2011). Conclusion Herein, the complexity of power has been demonstrated especially in light of social relations inherent and essential in the conduct of social work. For social workers to take issues of power into account, it is essential that three factors be considered: They must be aware of their power both within the social service structure and with regard to the power balance between them and the service user. This benefits them in enhancing their empowerment and approaches to practice. Secondly, empowerment is essential with the service user central to the process of change, and social workers facilitating, not directing the change. Reasons for feelings and powerlessness need to be addressed rather than being overridden through legitimate power in authority or expert power in knowing whats best. Third, there is need for social workers to take responsibility for their power acknowledging and valuing power differentials rather than viewing them as barriers to empowerment. These need to be incorporated in practice so as to enhance and encourage inclusivity in the social service structure, allowing for continuous critique and analysis. The development of effective communication skills for employment in effective social work requires the development of appropriate skills but also necessitates knowledge of issues involved that can enable a social worker to deal with challenges attendant to interactions essential in social work. Knowledge, unlike the other sources of power which can be used positively and negatively, can, however, also be used in a transformative way.    References Askheim, O., 2003. Empowerment as guidance for professional social work: an act of balancing on a slack rope. In: European Journal of Social Work, Vol. 6, No. 3, pp. 229-240 Bar-On, A., 2002. Restoring Power to Social Work Practice. In: British Journal of Social Work, Vol. 32, pp. 997-1014 Foucault, M., 1980. Power / Knowledge: Selected Interviews and other Writings: 1972-1977.’ London: Harvester Press Koprowska, J., 2008. Communication and interpersonal skills in social work (3rd ed.) University of York. Exeter: Learning Matters. Lukes, S., 1974. Power: a radical view. London: Macmillan Pease, B., 2002. Rethinking Empowerment: A Postmodern Reappraisal for Emancipatory Practice. In: British Journal of Social Work, Vol. 32, pp. 135-147 Thompson, N., 1993. Anti-Discriminatory Practice. The Macmillan Press Ltd.: London Thompson, N., 2011. Effective Communication: A guide for the people professions, p. 83. Palgrave: Hampshire Trevithick, P., 2010. Social work skills a practice handbook. Open University Press: Berkshire